Multifunctional wood fibre insulation board for five applications: ETICS, exterior cladding, rainproof underlay, interior insulation and installation level. Sustainable, natureplus®-certified and ‘Made in the Black Forest’.
Width 60 cm, tongue and groove all round

Impact sound improvement of up to 30 dB depending on the floor structure
6 mm thick
86 x 59 cm = 0.5 m² per panel
Weight per panel 0.8 kg
Surface weight 1.6 kg/m²
Simply cut to size with a cutter, as an intermediate layer under e.g. parquet, on concrete, screed, wooden floors, installation planks or screed elements

Moisture-regulating, open to vapour diffusion, additional thermal insulation, quick installation.

Thin rainproof underlay board with unique tongue and groove profiling, board dimensions: 2500 x 750 x 22 mm
Thermal conductivity nominal value 0.045 W/mK
Windproof tongue-and-groove joint protects the insulation construction from cold air flowing through

Thin rainproof underlay board with unique tongue and groove profiling, board dimensions: 2500 x 750 x 35 mm
Thermal conductivity nominal value 0.045 W/mK
Windproof tongue-and-groove joint protects the insulation construction from cold air flowing through

Wood fibre insulation board for external insulation (ETICS) on solid wood or mineral substrates and in timber frame construction - without rear ventilation.
Bulk density p: ~160 kg/m³
Nominal value thermal conductivity at 80 - 160 mm 0.040 W/mK
Compressive stress/strength 100 kPa
Tensile strength perpendicular to the board plane 10 kPa
Edge formation tongue and groove
1,3 / 0,60 m

0.77 m² per panel
Board size 135 x 57.5 cm
best wood fibre insulation mat for insulating roofs, partition walls, ceiling insulation or exterior walls
Nominal value thermal conductivity λD 0.036 W/mK
Bulk density ρ ~ 50 kg/m³
Easy to cut, low-dust, strong clamping force

Wood fibre insulation board for external insulation (ETICS) on solid wood or mineral substrates and in timber frame construction - without rear ventilation.
Bulk density p: ~160 kg/m³
Nominal value thermal conductivity at 80 - 160 mm 0.040 W/mK
Compressive stress/strength 100 kPa
Tensile strength perpendicular to the board plane 10 kPa
Edge formation tongue and groove
1,3 / 0,60 m

Hard PVC manufactured in accordance with DIN 16941.
Length 200 cm,

Hart-PVC gefertigt nach DIN 16941.
Länge 200 cm,

Kartuschen-Dichtmasse zum Verfüllen von verlegebedingten Fugen bei den Putzträgerplatten GUTEX Thermowall und GUTEX Thermowall-gf.

Thermo screw anchor 8 mm, for fastening GUTEX insulation boards in concrete, bricks, solid sand-lime bricks, hollow blocks made of lightweight concrete, perforated and hollow-hole bricks, aerated concrete. Impact depth at least 25 mm in load-bearing substrate.

Um Kältebrücken zu reduzieren, nutzen Sie den GUTEX WDVS Thermoschlagdübel mit Verschlusselement

Integrated protection against moisture
Waterproof in accordance with abP, test certificate number: P-1201/633/18 MPA-BS
Highly water-repellent

Verbrauch 0,5 kg/m³

zur Montage der Implio Laibungsplatten, Keilplatten und Raffstorekasten

Lighter plaster base board with high insulation performance for the Thermowall ETICS
Blunt edge
0.48 m² per board
Areas of application: full-surface mineral or solid wood substrates

Aluminiumprofil für den Sockelabschluß, 200 cm lang

Aluminiumprofil für den Sockelabschluß, 200 cm lang

Aluminiumprofil für den Sockelabschluß, 200 cm lang

Aluminiumprofil für den Sockelabschluß, 200 cm lang

Aluminiumprofil für den Sockelabschluß, 200 cm lang