Multifunktionale Holzfaser-Dämmplatte für fünf Anwendungen: WDVS, Außenbeplankung, regensichere Unterdeckung, Innendämmung und Installationsebene. Nachhaltig, natureplus®-zertifiziert und „Made im Schwarzwald“.

0.77 m² per panel
Board size 135 x 57.5 cm
best wood fibre insulation mat for insulating roofs, partition walls, ceiling insulation or exterior walls
Nominal value thermal conductivity λD 0.036 W/mK
Bulk density ρ ~ 50 kg/m³
Easy to cut, low-dust, strong clamping force

Impact sound improvement of up to 30 dB depending on the floor structure
6 mm thick
86 x 59 cm = 0.5 m² per panel
Weight per panel 0.8 kg
Surface weight 1.6 kg/m²
Simply cut to size with a cutter, as an intermediate layer under e.g. parquet, on concrete, screed, wooden floors, installation planks or screed elements

Moisture-regulating, open to vapour diffusion, additional thermal insulation, quick installation.

Wood fibre insulation board for interior insulation of exterior walls.
Bulk density p: ~130 kg/m³
Nominal value thermal conductivity at 40 - 100 mm 0.039 W/mK
Compressive stress/strength >50 kPa
Tensile strength perpendicular to the board plane > 7.5 kPa
Blunt edge formation
1200 / 500 mm

Thin rainproof underlay board with unique tongue and groove profiling, board dimensions: 2500 x 750 x 22 mm
Thermal conductivity nominal value 0.045 W/mK
Windproof tongue-and-groove joint protects the insulation construction from cold air flowing through

Thin rainproof underlay board with unique tongue and groove profiling, board dimensions: 2500 x 750 x 35 mm
Thermal conductivity nominal value 0.045 W/mK
Windproof tongue-and-groove joint protects the insulation construction from cold air flowing through

Wood fibre insulation board for external insulation (ETICS) on solid wood or mineral substrates and in timber frame construction - without rear ventilation.
Bulk density p: ~160 kg/m³
Nominal value thermal conductivity at 80 - 160 mm 0.040 W/mK
Compressive stress/strength 100 kPa
Tensile strength perpendicular to the board plane 10 kPa
Edge formation tongue and groove
1,3 / 0,60 m

Wood fibre insulation board for external insulation (ETICS) on solid wood or mineral substrates and in timber frame construction - without rear ventilation.
Bulk density p: ~160 kg/m³
Nominal value thermal conductivity at 80 - 160 mm 0.040 W/mK
Compressive stress/strength 100 kPa
Tensile strength perpendicular to the board plane 10 kPa
Edge formation tongue and groove
1,3 / 0,60 m

0.77 m² per panel
Board size 135 x 57.5 cm
best wood fibre insulation mat for insulating roofs, partition walls, ceiling insulation or exterior walls
Nominal value thermal conductivity λD 0.036 W/mK
Bulk density ρ ~ 50 kg/m³
Easy to cut, low-dust, strong clamping force

Wood fibre insulation board for external insulation (ETICS) on solid wood or mineral substrates and in timber frame construction - without rear ventilation.
Bulk density p: ~160 kg/m³
Nominal value thermal conductivity at 80 - 160 mm 0.040 W/mK
Compressive stress/strength 100 kPa
Tensile strength perpendicular to the board plane 10 kPa
Edge formation tongue and groove
1,3 / 0,60 m

Hart-PVC gefertigt nach DIN 16941.
Länge 200 cm,

Hart-PVC gefertigt nach DIN 16941.
Länge 200 cm,

Kartuschen-Dichtmasse zum Verfüllen von verlegebedingten Fugen bei den Putzträgerplatten GUTEX Thermowall und GUTEX Thermowall-gf.

Thermo screw anchor 8 mm, for fastening GUTEX insulation boards in concrete, bricks, solid sand-lime bricks, hollow blocks made of lightweight concrete, perforated and hollow-hole bricks, aerated concrete. Impact depth at least 25 mm in load-bearing substrate.

Um Kältebrücken zu reduzieren, nutzen Sie den GUTEX WDVS Thermoschlagdübel mit Verschlusselement

Integrierter Schutz gegen Feuchtigkeit
Wasserdicht gemäß abP, Prüfzeugnisnummer: P-1201/633/18 MPA-BS
Sehr hoch wasserabweisend

Verbrauch 0,5 kg/m³

zur Montage der Implio Laibungsplatten, Keilplatten und Raffstorekasten

Lighter plaster base board with high insulation performance for the Thermowall ETICS
Blunt edge
0.48 m² per board
Areas of application: full-surface mineral or solid wood substrates

Aluminiumprofil für den Sockelabschluß, 200 cm lang

Aluminiumprofil für den Sockelabschluß, 200 cm lang