Floor Lacquer No. 267

AURO Floor Varnish No. 267 is a transparent varnish manufactured without added solvents\1 that gives wooden floors a highly hard-wearing and dirt-repellent finish. With a moderate sheen, slip- and abrasion-resistant as well as resistant to saliva and perspiration.

From the Aqua line – particularly well suited to heavily used residential and commercial floors that require a brilliant, antistatic surface.

Advantages at a glance

• Brilliant appearance
• Antistatic
• Abrasion-resistant and slip-resistant
• Resistant to saliva and perspiration
• Without added solvents

Use & Application

Prime woods rich in extractives with AURO special primer No. 117 and other woods with AURO hard primer No. 127. Using a roller, apply at least 2 coats of floor varnish thinly, evenly and quickly in a criss-cross pattern.

Tip: Allow a drying time of 24 hours between coats. The surface is fully cured after 7 days – until then, treat it gently and avoid moisture.

Technical data

Area of application	Wooden floors, transparent
Application	Roller, at least 2 coats
Drying time between layers	approx. 24 hours
Through-curing	after 7 days
0.75 litre container	Coverage approx. 13 m²
2.5 litre container	Coverage approx. 42 m²

Ingredients (full declaration)

AURO fully discloses its formulations. The following overview shows the substance groups that make up this lacquer:

• Renewable raw materials – 84.5 %
• Processed natural raw materials – 8.2 %
• Mineral substances – 7.3 %

Ingredients: Water, linseed oil, rosin glycerol ester with organic acids, mineral fillers, rapeseed and castor oil surfactants, silicic acid, cobalt-free driers, ricinene oil, sunflower oil, cellulose, beeswax, fatty acids.

Frequently asked questions

Do I need to pre-treat the floor?

Yes. Timbers rich in extractives (e.g. oak, walnut, bamboo, cork) with AURO Special Primer No. 117, other timbers with AURO Hard Primer No. 127.

How many layers do I need?

At least 2 coats, applied thinly and evenly in a criss-cross pattern, with 24 hours' drying time in between.

How long does it take until the floor can bear full loads?

The surface is fully cured after 7 days – until then, treat it gently and avoid moisture.

Is the varnish slip-resistant?

Yes, it is abrasion-resistant and slip-resistant as well as resistant to saliva and perspiration (relevant e.g. for children's rooms).

What gloss level does the varnish have?

A moderate sheen, transparent on the treated wood.

Is the varnish free from added solvents?

Yes, completely free from added solvents.