Hard Oil No. 126

AURO Hard Oil No. 126 is suitable for all interior wood and cork surfaces under normal wear. It can also be used as a primer on absorbent surfaces before they are further treated with oil or wax. The result is warm, honey-toned surfaces.

If required, the oil can be tinted with AURO Tinting Colour for Natural Resin Oils No. 150 (max. 20 %).

Advantages at a glance

• Ideal for cork surfaces
• Highly hard-wearing
• Einfache Anwendung
• Warmer Honigton
• Can also be used as a primer before oil or wax treatment
• Can be tinted with AURO Tinting Paint for Natural Resin Oils No. 150

Anwendung & Verarbeitung

Apply the oil evenly with a brush, roller or cloth and, within 30 minutes, work in or wipe off any excess oil. Repeat the treatment after 24 hours if required.

Tip: The oil is equally suitable for wood and cork – it is important to consistently remove excess oil within the first 30 minutes so that no sticky patches form.

Technische Daten

Anwendungsbereich	Wood and cork surfaces, interior
Verarbeitung	Brush, roller or cloth
Überarbeitungszeit	after 24 hours
Gebinde 0,375 Liter	Ergiebigkeit ca. 8 m²
Gebinde 0,75 Liter	Ergiebigkeit ca. 15 m²
Gebinde 2,5 Liter	Ergiebigkeit ca. 50 m²
Gebinde 5 Liter	Ergiebigkeit ca. 100 m²
Gebinde 20 Liter	Ergiebigkeit ca. 400 m²

Inhaltsstoffe (Volldeklaration)

AURO fully discloses its formulations. The following overview shows which substance groups make up this hard oil:

• Nachwachsende Naturstoffe – 93,5 %
• Verarbeitete Naturstoffe – 6,5 %

Ingredients: Orange terpenes, tung oil, linseed oil, rosin glycerol ester with organic acids, sunflower oil, dehydrated castor oil, fatty acids, driers.

Frequently asked questions

Which surfaces is the hard oil suitable for?

For all interior wood and cork surfaces subject to normal wear, e.g. floors, furniture or worktops.

What colour will the wood turn?

The oil produces a warm honey tone. It can additionally be tinted with AURO Tinting Colour for Natural Resin Oils No. 150 (max. 20 %).

How long does it take to dry?

After 24 hours, the treatment can be repeated if necessary.

What happens if I do not remove excess oil in time?

Excess oil should be rubbed in or removed within 30 minutes, otherwise sticky, uneven patches may form.

Can I also use the hard oil as a primer?

Yes, it is also suitable as a primer on absorbent surfaces before they are further treated with oil or wax.

What container sizes are available?

From 0.375 litres for small areas to 20 litres for professional use.