Kreidezeit

Wood Lazure

Piece

Ready-to-use, biocide-free oil glaze in 9 classic wood tones for wood indoors and out – windows, doors, façades, timber framing, fences, garden furniture. High linseed-oil content, stays elastic, lightfast earth pigments for UV protection. Vegan. Coverage: approx. 0.05–0.10 l/m² per coat – 750 ml ≈ 12 m², 2.5 l ≈ 40 m² per coat.

23.90 € 23.900000000000002 EUR 23.90 €

0.00 €

(0.00 € / Piece)
  • Content
  • Glazes


Downloads

* all prices incl. VAT, excl. Shipping costs (these are displayed in the shopping basket).

KREIDEZEIT Holzlasur in wood shades is a ready-to-use oil glaze with a high linseed oil content, available in 9 classic wood shades for interior and exterior timber. It remains elastic and does not flake or crack; instead, it weathers away at the surface and can be renovated.

The lightfast earth pigments accentuate the natural grain, provide good UV protection and protect against greying. For use on windows, doors, façades, timber framing, play equipment, fences, garden furniture, carports and beehives.

Properties

  • ready to use, 9 wood colour shades
  • dirt- and water-repellent
  • transparent, glossy, accentuates the grain
  • good UV protection thanks to lightfast earth pigments
  • gradually weathers at the surface – does not spall, crack or flake
  • weather-resistant and elastic
  • can be renovated by cleaning and overpainting
  • resistant to saliva and perspiration according to DIN 53160
  • biocide-free
  • contains solvent (gum turpentine oil)
  • cobalt-, lead- and barium-free
  • vegan

Suitable substrates

Planed or sanded wood, interior and exterior. Not for rough-sawn wood, existing synthetic resin-based coatings or roof surfaces. Floors only to a limited extent on request.

Use & Application

Preparation: Wood must be clean, dry, planed/sanded. Pre-treat highly absorbent edges with KREIDEZEIT resin oil or primer oil.

Application: Apply thinly along the grain, 2–3 coats with drying time between coats; remove excess.

Maintenance: Refresh weathered surfaces with KREIDEZEIT Care Oil in good time.

Tools & cleaning: Paintbrush; clean immediately with gum turpentine.

Technical data

Colour shades9 classic wood tones
UV protectionthanks to lightfast earth pigments
Coatings2–3 thin
Solventsbalsam turpentine oil (gum turpentine)
Biocidescontains no
TestsDIN 53160

Full declaration

Linseed oil, linseed stand oil, tung oil stand oil, gum turpentine, rosin glycerol ester, lightfast earth and mineral pigments, manganese/calcium drier. When using the product, observe the complete product information (technical data sheet and safety data sheet).

Note: Lay out oil-soaked rags flat to dry (risk of spontaneous combustion). Observe the safety data sheet.

Frequently asked questions

Why does the glaze not flake off?
KREIDEZEIT Holzlasur has a high linseed oil content and remains elastic. It does not form a brittle film; instead, its surface gradually weathers away, and it can be renovated by cleaning and recoating.

Clear or pigmented?
Indoors, a clear finish can be used. Outdoors, lightfast pigments are required – they accentuate the grain, provide UV protection and prevent greying.

How many coats are needed and how do I maintain the surface?
As a rule, two to three thin coats with drying time in between. To maintain weathered surfaces, use KREIDEZEIT Care Oil before the surface turns matt.

Where is the glaze not suitable?
Not on rough-sawn timber, synthetic-resin-based existing coatings or roof surfaces. Use on floors only to a limited extent and on request.

Handelsmarke Adresse
Kreidezeit Naturfarben GmbH
Kassemühle 3, 31195 Lamspringe, Deutschland
+49 5060 6080650
info@kreidezeit.de