Clinker Oil No. 114

AURO Clinker Oil No. 114 is an excellent choice for cotto, clinker, stone or unglazed tiles, indoors and outdoors. This all-purpose oil protects and enhances the surfaces without sealing them, so they remain open-pored.

The oil brings out the colour and grain, evens out differences in absorbency and consolidates slightly sanding substrates.

Advantages at a glance

• Evens out differences in absorbency
• With a grain-enhancing effect
• Easy application
• Consolidates slightly sanding substrates
• Suitable for interior and exterior use
• Can be finished with AURO Hard Wax No. 171 or Beeswax Balm No. 981

Use & Application

Stir well; carry out a test application if necessary. Apply evenly with a brush or roller. Within 10 minutes, rub in, spread and remove any oil that has not been absorbed using a clean cloth or pad. Repeat the treatment until the substrate is fully saturated.

Tip: The clinker oil is suitable both as a stand-alone final treatment and as an equalising treatment before using other products such as hard wax or beeswax balm.

Technical data

Area of application	Clinker, cotto, natural stone, unglazed tiles, indoor/outdoor
Application	Brush or roller
Recoatable	after approx. 24 hours
Final hardness	after approx. 4 weeks
0.75 litre container	Coverage approx. 15 m²
2.5 litre container	Coverage approx. 50 m²

Ingredients (full declaration)

AURO fully discloses its formulations. The following overview shows which substance groups make up this oil:

• Renewable raw materials – 93 %
• Processed natural raw materials – 6 %

Ingredients: Orange terpenes, tung oil, linseed oil, rosin glycerol ester with organic acids, sunflower oil, dehydrated castor oil, fatty acids, cobalt-free driers.

Frequently asked questions

What floors is the clinker oil suitable for?

For cotto, clinker, stone or unglazed tiles indoors and outdoors.

Does the surface remain open-pored after treatment?

Yes, the clinker oil protects and enhances the surface without sealing it.

Can I also use the oil as a pre-treatment?

Yes, it evens out differences in absorbency before finishing with Hard Wax No. 171 or Beeswax Balm No. 981.

Does the oil change the colour of the floor?

It has a colour-enhancing effect, meaning the natural colour is intensified without heavily staining the floor.

How long until it reaches full hardness?

Final hardness is reached after around 4 weeks; the surface can be worked over after approx. 24 hours.

How do I apply the oil?

Apply evenly with a brush or roller and remove any oil that has not been absorbed after 10 minutes. Repeat if necessary.