0.77 m² per panel
Board size 135 x 57.5 cm
best wood fibre insulation mat for insulating roofs, partition walls, ceiling insulation or exterior walls
Nominal value thermal conductivity λD 0.036 W/mK
Bulk density ρ ~ 50 kg/m³
Easy to cut, low-dust, strong clamping force

Wood fibre insulation board for external insulation (ETICS) on solid wood or mineral substrates and in timber frame construction - without rear ventilation.
Bulk density p: ~160 kg/m³
Nominal value thermal conductivity at 80 - 160 mm 0.040 W/mK
Compressive stress/strength 100 kPa
Tensile strength perpendicular to the board plane 10 kPa
Edge formation tongue and groove
1,3 / 0,60 m

Vapor barrier paper for interior work

Surface treatment and sealing for smoothing clay, rammed earth and wood. Rammed earth 1:2 / 5-7 m² per 0.5 l. Smoothing clay 1:6 / 25-35 m² per 0.5 l

Second coat plaster made of clay and straw, robust, classic material for large dimensions. Content yields for approx. 1,7 m² at D= 1.5 cm

Expanded clay lightweight aggregate according to DIN EN 13055-1
Mix with NHL 5 to produce insulating screed or subfloor structures. For a load-bearing and insulating subfloor, mix 350 kg of NHL 5 per 1 m³.

1 m³ hemp lime fill, loose as filling for a facing wall, ceiling filling or floor insulation between the bearing timbers

45 litres of hemp lime fill, loose as a filling for a facing wall, ceiling filling or floor insulation between the bearing timbers

Organic architecture is a type of construction that emerged around 1900 in search of a completely new style for the new era.

Compressive strength class 5, application class II
is used for load-bearing, clad or otherwise structurally weather-protected exterior masonry and interior masonry in accordance with DIN 18940
Consumption:
33 bricks / m² for 17.5 cm masonry thickness
44 bricks / m² for 24.5 cm masonry thickness
66 bricks / m² for 36.0 cm masonry thickness

Real clay colour samples to feel - find your favourite shade with hand-painted original samples. Natural. Healthy. Simply decide.

All-round adhesive tape for inside and outside

Colored, highly opaque and very weatherproof protective coatings for wooden surfaces indoors and especially outdoors
Consumption per m²: 0.06 - 0.08 l
Color white also in 5 liters

Hard PVC manufactured in accordance with DIN 16941.
Length 200 cm,

Hart-PVC gefertigt nach DIN 16941.
Länge 200 cm,

Hart-PVC gefertigt nach DIN 16941.
Länge 200 cm,

Hart-PVC gefertigt nach DIN 16941.
Länge 200 cm,

Hart-PVC gefertigt nach DIN 16941.
Länge 200 cm,

Die GUTEX Streichdichtung ist eine strukturviskose Funktionsbeschichtung mit kapillarbrechendem Charakter. Sie wird als partielle Beschichtung zur Verringerung der Feuchteaufnahme über die Oberfläche der GUTEX Holzfaserdämmstoffe eingesetzt. Besonders relevant sind feuchtekritische Anschlussdetails. Die Anwendung erfolgt vor der Putzbeschichtung sowie im Implio Fenster- und Türanschluss-System.

Zementgebundener, faserarmierter Trockenmörtel (anorganischer Mörtel)

Kartuschen-Dichtmasse zum Verfüllen von verlegebedingten Fugen bei den Putzträgerplatten GUTEX Thermowall und GUTEX Thermowall-gf.