HP 9 bio-lime plaster, as a base plaster for inside (also damp rooms) and outside, coarse grain (4 mm), for thick layers and stable plaster or as masonry mortar. Content sufficient for approx. 0,9 m² with an application thickness of 20 mm.

HP 9 Organic lime plaster, for thin-layer leveling for inside and outside,
Content is sufficient for approx. 1,3 m² with an application thickness of 15 mm.
Grain 1 mm

Lighter lime undercoat plaster for inside and outside. With an application thickness of 20 mm, content is sufficient for approx. 1.2 m². Also as masonry mortar for Hempcrete blocks

Undercoat plaster for inside and outside, very good workmanship thanks to the hemp surcharge. With a 20 mm application thickness content is sufficient for approx. 1 m²

Lime base plaster, easy to work with by added hemp and clay. Content is sufficient for 0,8 m² with a 20 mm thickness

Purely mineral natural lime mortar, especially for cellars.
Content is sufficient for 1,3 m² with a 20 mm thickness

Lime insulating plaster for indoor use - free of cement and pozzolan. Content is sufficient for 3,2 m² with a 1 cm thickness. Consumption: approx. 4kg/ m²/ cm application

Lime insulation plaster for outdoor use - free of cement and pozzolan.
Content is sufficient for 3,2 m² with a 1 cm thickness
Consumption: approx. 4kg/ m²/ cm application

Pre-spray mortar without cement . Content sufficient for 5 m². Max. application thickness 5 mm

Topcoat plaster or leveling plaster, finish coat, large possible layer thickness. With an application thickness of 3 mm, the 25 kg sack results in approx. 9 m², with an application thickness of 10 mm, approx. 2.65 m².

A decorative finishing plaster made up of naturally hydraulic lime, white lime hydrate, marble powder, and a small amount of cellulose, in different colors. Range: approx. 10 m² (grain 0.3 and 0.5mm), approx. 7 m² (grain 1.0mm)

A decorative finishing plaster made up of naturally hydraulic lime, white lime hydrate, marble powder, and a small amount of cellulose, pure white. Range: approx. 10 m² (grain 0.3 and 0.5mm), approx. 7 m² (grain 1.0mm)

Fine lime smoothing compound for interior use, colour white. Content is sufficient for ~ 12.5 to 25 m², depending on the surface.

An Italian spatula technique for structured surfaces. Content is sufficient for ~ 15-30 m², depending on the subsurface.

A classic filler plaster for creating a flat, smooth surface. Contents sufficient for 10 to 20 m². Application thickness 1 mm

natural tadelakt, waterproof lime coating for indoor use
Yield: 20 m² with a 1 mm thickness

Brushable plaster with a large filling capacity and perfect coverage. Yield: ~ 20 m², Consumption: 0,5 l/ m² per coat

ecological primer for plasters for indoor use.
Contents 7,1 kg, Yield: 35-20 m², Consumption: 200-350 g/m²

white primer for a later coat.
Contents 5 kg, Yield: 25-15 m², Consumption: 200-350 g/m²

Problem solver for uneven subsurface. Sufficient for 4 m² with a plaster thickness of 5 mm

for a wart-shaped pre-spray on sand-lime bricks. Content of 25 kg results in approx. 16l of wet mortar; this is sufficient for approx. 5 m² fully covering or approx. 8 m² semi-covering.