Decking Oil No. 110

A fresh look for your wooden decking: AURO Decking Oil No. 110 makes old decking boards look like new again and gives new decking timber protection and depth of colour. Available in the shades Bangkirai, Teak and Larch.

The magazine “selbst ist der Mann” rated the decking oil “very good” in a practical test.

Advantages at a glance

• Easy application
• For an elegant look
• Water- and dirt-repellent
• Protects against UV radiation
• Improved weather resistance thanks to colour pigments
• Rated “very good” by „selbst ist der Mann“

Use & Application

Clean soiled decking first with AURO Garden Wood Cleaner No. 801. Apply the oil evenly in 1 to 2 coats with a brush or cloth. Remove or rub in any oil that has not penetrated within 30 minutes.

Tip: Check the colour effect beforehand with a test coat in an inconspicuous area. For grooved decking boards, allow for more oil because of the larger surface area, and apply with a scrubbing brush wrapped in a cloth.

Technical data

Area of application	Outdoor timber decking
Application	Brush or cloth
Colour shades	Bangkirai, teak, larch
0.75 litre container	Coverage approx. 15 m²
2.5 litre container	Coverage approx. 50 m²

Ingredients (full declaration)

AURO fully discloses its formulations. The following overview shows which substance groups make up this oil:

• Renewable raw materials – 93.7 %
• Processed natural raw materials – 2.4%
• Mineral substances – 3.9 %

Ingredients: tung oil, orange terpenes, linseed oil, mineral pigments, fatty acids, cobalt-free driers, silica, lecithin.

Frequently asked questions

Do I need to clean the decking before oiling?

Yes, soiled decking should first be cleaned with AURO Gartenholz-Reiniger No. 801.

What shades are available?

Bangkirai, teak and larch – check the effect beforehand with a test coat.

Why are the colour pigments important?

They protect against UV radiation and improve the weather resistance of the wood.

How much oil do I need for grooved decking boards?

Considerably more than for smooth surfaces, as grooved wood has a larger surface area. A scrubbing brush wrapped in a cloth makes application easier.

How often should I re-oil the terrace?

Regularly, depending on weather exposure, to maintain protection and depth of colour.

How do I apply the oil?

Apply 1 to 2 coats evenly with a brush or cloth; remove excess oil within 30 minutes.