The world's hardest natural wax as a raw material for homemade waxes, oil-wax blends and emulsions. Vegan, solvent-free.

Deep-penetrating, solvent- and water-free oil for worktops, tables and furniture in almost any wood – especially for the kitchen and dining area, also for chopping boards. Tested to LFGB §31 (food-contact safe), tintable with KREIDEZEIT pigments, vegan. Coverage: approx. 0.05–0.10 l/m² per coat, depending on substrate absorbency; 500 ml covers approx. 10 m².

Glutolin L glue for paint, pure methyl cellulose.
Yield: 125 g covers approx. 40–110 m², depending on the application (e.g. pre-sizing 1:50 ≈ 60–80 m², limewash coat 1:25 ≈ 85–110 m²).

Reichweite: -, Verbrauch: -

oval, pure light China bristles, size: 13 cm x 5.5 cm, bristle length: 65 mm
For all wall and ceiling coatings with all wall paints and brushed plasters

with flexible blade and rounded corners

pure black China bristles, beveled, width: 1 inch

pure black China bristles, beveled, width: 1,5 inch

pure light China bristles, thickness: 14 mm, bristle length: 48 mm

pure light china bristles, open front, size: 22 x 3 cm, bristle length: 43 mm

Ready-to-use, pasty hard wax as an additional silk-gloss protective layer for oiled surfaces – especially floors, also furniture and doors. Hardness comes from carnauba wax. Not for wet rooms or kitchen worktops. Coverage: approx. 0.02 l/m² per coat; 1 l covers approx. 50 m².

Highly concentrated olive-soap solution as a protective finishing treatment for KREIDEZEIT polished plasters (Stuccolustro, Stucco Fein, Tadelakt, Marmorino) and matt lime surfaces. Forms a water- and dirt-repellent lime soap on still-alkaline lime. Dilute 1:6 with water.

From controlled stocks, natural product, unbleached.
Suitable for dab and sponge techniques

made of high quality polished stainless steel.
For plastering large areas

Solvent- and water-free hard oil for normally absorbent interior timber – worktops, floors, tables, furniture. Hard-wearing, deep-penetrating, tintable with KREIDEZEIT pigments. Toy-tested (EN 71-3), vegan. Coverage: approx. 0.05 l/m² per coat – 375 ml ≈ 7.5 m², 750 ml ≈ 15 m², 2.5 l ≈ 50 m², 5 l ≈ 100 m², 10 l ≈ 200 m² per coat.

Special primer for very heavily absorbent timber – end grain, beam ends, cut edges, indoors and out. Rosin glycerol ester in balsam turpentine; strongly reduces absorbency, for later overcoating with KREIDEZEIT wood glaze and stand-oil paint. Consumption: approx. 0.10–0.20 l/m² per coat (end grain/timber ends, depending on absorbency of the substrate).

“Painter quality”, pure light China bristles, width: 3 inches, bristle length: 62 mm

Particularly hard-wearing, fast-drying floor and worktop oil for interiors – also for more absorbent woods (spruce, pine, beech), OSB and cork. Very good water resistance, tintable with KREIDEZEIT pigments. Vegan. Coverage: approx. 0.07 l/m² per coat – 750 ml ≈ 10 m², 2.5 l ≈ 33 m² per coat.

Ready-to-use, biocide-free oil glaze in 9 classic wood tones for wood indoors and out – windows, doors, façades, timber framing, fences, garden furniture. High linseed-oil content, stays elastic, lightfast earth pigments for UV protection. Vegan. Coverage: approx. 0.05–0.10 l/m² per coat – 750 ml ≈ 12 m², 2.5 l ≈ 40 m² per coat.

Vapour-permeable, biocide-free oil-glaze protective coating for wood indoors and out – windows, doors, façades, timber framing, play equipment, fences, garden furniture. High linseed-oil content, stays elastic, clear or tinted with KREIDEZEIT pigments. Vegan. Coverage: approx. 0.06 l/m² per coat – 750 ml ≈ 12 m², 2.5 l ≈ 40 m², 5 l ≈ 80 m², 10 l ≈ 160 m², 20 l ≈ 320 m² per coat.

Also called tung oil.
High quality raw material for the production of glazes and oil paints.