Anti-mould paint No. 327

AURO Anti-Mould Paint No. 327 reduces the risk of mould thanks to its high pH value. It is a moisture-regulating interior wall paint made without added solvents, with high opacity, and is child's play to apply with a brush or roller. The paint is available in white only.

Use biocidal products with care. Always read the label and product information before use.

Advantages at a glance

• Strongly alkaline (high pH value)
• Moisture-regulating
• Good hiding power
• Without added solvents
• Easy application, roll or brush on
• Can be tinted with AURO Lime Colour Paint No. 350

Application & Processing

Stir well, then apply 1 to 2 coats evenly and swiftly with a brush or roller. Allow 24 hours between coats.

Tip: If mould is already present, first apply AURO Mould Remover No. 412 and AURO Mould Stop No. 413 – both are available together with 1 L of Anti-Mould Paint in the Pur-san3 set, item no. 414. When wet, the paint appears transparent and only covers fully once dry.

Technical data

Area of application	Interior walls, white
Application	Brush or roller
Recoating time	approx. 24 hours
Active substance	Calcium hydroxide, 390 g/L (BAuA No. N-79793)
1-litre container	Coverage approx. 10 m²
5 litre container	Coverage approx. 50 m²

Ingredients (full declaration)

AURO fully discloses its formulations. The following overview shows the substance groups that make up this wall paint:

• Renewable natural materials – 57.2 %
• Processed natural materials – 1%
• Mineral materials – 41.8 %
• Synthetic substances – 0 %

Ingredients: water, calcium hydroxide, titanium dioxide, mineral fillers, cellulose, alcohol.

Note: Contains calcium hydroxide, which causes serious eye damage and skin irritation. Wear safety goggles, gloves and face protection during application; see the safety data sheet.

Frequently asked questions

Does the paint remove existing mould?

No, the anti-mould paint has a preventive effect thanks to its high pH value. Existing mould must first be removed with AURO Schimmel-Entferner No. 412 and treated with AURO Schimmel-Stop No. 413.

Is there a complete package for mould problems?

Yes, the Pur-san3 set (item no. 414) contains Mould Remover No. 412, Mould Stop No. 413 and 1 litre of Anti-Mould Paint No. 327.

Can I tint the paint with colour?

Yes, with AURO Lime Colour Paint No. 350. Please note: tinting may reduce the product's properties that lower the risk of mould.

Why does the paint look transparent when wet?

This is normal with lime-based paints: full opacity only develops once the paint has dried completely.

Is there anything I need to bear in mind during application?

The paint contains calcium hydroxide and can cause serious eye damage and skin irritation – wear safety goggles, gloves and face protection. Use biocidal products with care; always read the label and product information before use.

How much area does one container cover?

1 litre covers around 10 m², 5 litres around 50 m².