Clay plaster mortar with chopped straw for plastering masonry, wall heating, or a suitable plaster carrier. Maximum layer thickness: 3 cm per application.
Consumption: 45 kg per m² at a layer thickness of 3 cm.

Clay-based adhesive mortar for bonding insulation boards, clay building boards, for fabric layers on clay building boards or softwood fiberboards. Application thickness 1-5 mm.
Consumption: 6,4 kg / m² with a layer thickness of 5 mm

Real slaked lime paint, high-quality wall paint for inside. Content is sufficient for ~ 80 to 50 m²

Coloured filler for the production of Q4 surfaces made of clay, sandable, can be smoothed over several times.
Consumption: 1 kg/m² at 1 mm layer thickness (max. 2 mm)
Consumption as joint filler: 300 g/m²

480 mm × 130 mm, professional version made of Steel

To make brushed clay plaster out of clay paint. Content is enough for 5 kg of clay paint.

Lime insulating plaster for indoor use - free of cement and pozzolan. Content is sufficient for 3,2 m² with a 1 cm thickness. Consumption: approx. 4kg/ m²/ cm application

primer for plasters for indoor use.
Contents 7,1 kg, Yield: 35-20 m², Consumption: 200-350 g/m²

Problem solver for uneven subsurface. Sufficient for 4 m² with a plaster thickness of 5 mm

for spotting wall heating pipes, 17x7 cm

Sponge board 280 x 140 for very fine surfaces

180 mm long trowel for finishing fine clay and lime surfaces

Finish coat plaster for the finest surfaces ready for painting. Natural brown can also be used as the end result. Thin layers possible from 1 to 3 mm. Consumption: 5 kg/m² at 3 mm thickness.

280 × 130 mm professional version, smoothing trowel for clay plaster or lime plaster, rounded corners for easy processing of reinforcement mesh