Press connector for connecting 2 lines, with 90 ° bend

for connecting the heating pipe to the heating circuit distributor

to close an unused heating circuit

Connector for connecting a heating pipe with an internal thread

Connection piece for connecting a heating pipe with an external thread

for connecting a copper line 15 mm and the heating pipe

Press connector for connecting 2 lines

Tool set for 16 mm WEM MV pipe with a selection of fittings
(4 x press coupling, 4 x press angle, 4 x Eurocone screw connection R¾" 4 x press transition ½" AG, 2 x press transition ½ “IT)

for crimping pliers
Multi-layer composite pipe 16 x 2 mm

for 16 x 2 mm multi-layer composite pipe

for MV-pipe 16 x 2 mm

for multi-layer composite pipe 16 x 2 mm

for filling the wall heating

for pressure testing of the installed wall heating surface

for spotting wall heating pipes, 17x7 cm

LPM 0 / 2f-SII-1,8 according to DIN 18947Quartz sand Ø up to 2 mm, Miscanthus approx. 10 mm. 1 sack yields approx. 16.6 l mortar and with a 1 cm plaster application is sufficient for 1.66 m², for plastering WEM Wall heating panels and Wall heating pipes systems

Glass fiber orange,
1 m x 50 m roll, mesh size 10 x 10 mm; 140 g/m²

Glass fiber orange,
1 m x 50 m roll, mesh size 7.1 x 7.4 mm; 105 g / m²

Supplementary plate, 62.5 cm x 100 cm x 2.5 cm; 0.625 m², approx. 22 kg / panel,
Gross density approx. 1400 kg / m³,
Components: clay, sand, plant fibers and fiberglass fabric

Supplementary plate for ceiling mounting
62.5 cm x 100 cm x 2.5 cm; 0.625 m², approx. 22 kg / panel,
Gross density approx. 1400 kg / m³Components: clay, sand, plant fibers and glass fiber fabric, contains dispersion (<1%)

Rinse and fill to flush out even the last air bubbles