1. All products
  2. Clay paint, pure white
EUR
Claytec

Clay paint, pure white

10 Liter bucket

Clay paint for indoor use, mixed ready to use. Content yields for approx. 30 m²

69.73 € 69.73 EUR 69.73 €

58.60 €

(6.97 € / Liter)


    Downloads

    * all prices incl. VAT, excl. Shipping costs (these are displayed in the shopping basket).

    To be successful, your content needs to be useful to your readers.

    Conluto clay building board, 22 mm thick



    Claytec clay paint pure white


    Clay coatings without and with grain for clay plasters and many other interior substrates. CLAYTEC clay paint 13.000 and clay roller plaster 13.100 are ready-to-use coatings that can also be applied with a roller. The coating is solvent-free and vapour-permeable. Preparatory primers are generally not required. Slightly uneven surfaces can be levelled with CLAYTEC clay roller plaster, applied 0.5 mm thick in one operation. Clay paints in liquid form are not possible without the addition of preservatives. The ready-to-use clay paints and clay roller plasters from Claytec contain a small amount of preservative.

    Clay roller plaster

    Te​chnical

    • Product and application: Clay paint and clay roller plaster for interior use (not in splash-water areas). On clay plasters, mineral plasters, drywall boards and other standard building substrates.

    • Composition: water, marble powder (roller plaster with crushed limestone up to 1.0 mm), kaolin, clay, methylcellulose, chalk, titanium dioxide, talc, bentonite, preservative < 0.01 %*.  

    • Consumption: Clay paint: 10 l for approx. 30 m² Coverage generally depends on the substrate and the tool used.

    • Storage: In sealed containers, the product can be stored for 9 months in a dry, cool (frost-free!) place. Reseal opened containers tightly and use them up promptly.

    • Substrate: The substrate must be dry, frost-free, load-bearing, firm, sufficiently rough and clean. Pre-treat sanding substrates with CLAYTEC Deep Primer and Consolidant (13.405, 13.400); this can also be used to even out substrates with differing absorbency. Pre-treat areas with bleed-through substances (e.g. rust, soot, nicotine, lignin or similar) with a stain-blocking primer and prepare a test area! Pre-treat gypsum plasterboards with plasterboard deep primer.

    • Application: Do not apply the finish at temperatures below 12°C. Stir the contents of the bucket thoroughly; up to 10% water can be added. Apply the material evenly with a roller (or with a brush). Clay roller plaster is generally applied approx. 0.5 mm thick to achieve a grainy surface finish. Ensure a supply of fresh air during application and drying. Only paint over areas that are still patchy or apply second coats once the previous coat has dried. Remove splashes etc. immediately with water and, if necessary, soap.

    • Working time: Clean material remains workable for approx. 14 days.

            -----------------------

    * 1,2-benzisothiazolin-3-one, CAS No. 2634-33-5 and 2-methyl-4-isothiazolin-3-one, CAS No. 2682-20-4


    Handelsmarke Adresse
    Claytec GmbH & Co. KG
    Nettetaler Str. 113, 41751 Viersen, Deutschland
    +49 2153 9180
    auftrag@claytec.com