1. All products
  2. Clay roll plaster, pure white, "ready to use"
EUR
Claytec

Clay roll plaster, pure white, "ready to use"

10 Liter bucket

Roll clay plaster for the interior, layer thickness up to 0.5 mm as a paint. Coverage approx. 20 m², dependent on the substrate and the tool used.

69.73 € 69.73 EUR 69.73 €

58.60 €

(6.97 € / L)


    Downloads

    * all prices incl. VAT, excl. Shipping costs (these are displayed in the shopping basket).

    As an authorised Conluto stockist, we keep the equivalent products – in outstanding quality – in stock in large quantities.​

    Conluto brush-on plaster

    Benefit from fair terms, high stock availability and our wide product portfolio of natural building materials!

    To be successful, your content needs to be useful to your readers.

    Conluto clay building board, 22 mm thick


    Claytec clay roller plaster

    Clay coatings without and with grain for clay plasters and many other interior substrates. CLAYTEC clay paint 13.000 and clay roller plaster 13.100 are ready-to-use coatings that can also be applied with a roller. The coating is solvent-free and vapour-permeable. Preparatory primers are generally not required. Slightly uneven surfaces can be levelled with CLAYTEC clay roller plaster, applied at 0.5 mm in a single pass. Clay paints in liquid form are not possible without the addition of preservatives. The ready-to-use clay paints and clay roller plasters from Claytec contain a small amount of preservative.

    View the clay paint

    ​

    Technical details

    • Product and application: Clay paint and clay roller plaster for interior use (not in splash zones). On clay plasters, mineral plasters, drywall boards and other common building substrates.

    • Composition: Water, marble powder (roller plaster with crushed limestone up to 1.0 mm), kaolin, clay, methylcellulose, chalk, titanium dioxide, talc, bentonite, preservative < 0.01 %*.

    • Packaging: 10 l oval lidded bucket, 30 buckets/pallet

    • Consumption of clay roller plaster: 10 l for approx. 20 m². Coverage generally depends on the substrate and the tools used.

    • Storage: Can be stored in sealed containers for 9 months in dry, cool (frost-free!) conditions. Reseal opened containers tightly and use up promptly.

    • Substrate: The substrate must be dry, frost-free, load-bearing, firm, sufficiently rough and clean. Pre-treat dusting substrates with CLAYTEC deep primer and consolidant (13.405, 13.400), where necessary also to even out substrates with differing absorbency. Pre-treat areas with bleeding substances (e.g. rust, soot, nicotine, lignin or similar) with stain-blocking primer; prepare a test area! Pre-treat gypsum drywall boards with plasterboard deep primer.

    • Application: Surface: do not apply below 12°C. Stir the contents of the bucket thoroughly; up to 10% water may be added. Apply the material evenly with a roller (or with a brush); clay roller plaster is usually applied approx. 0.5 mm thick to achieve a grainy surface finish. Ensure a supply of fresh air during application and drying. Only paint over areas that are still patchy, or apply second coats, once dry. Remove splashes or similar immediately with water and, if necessary, soap.

    • Working time: Clean material remains workable for approx. 14 days

            -----------------------

    * 1,2-benzisothiazolin-3-one, CAS No. 2634-33-5 and 2-methyl-4-isothiazolin-3-one, CAS No.2682-20-3

    Handelsmarke Adresse
    Claytec GmbH & Co. KG
    Nettetaler Str. 113, 41751 Viersen, Deutschland
    +49 2153 9180
    auftrag@claytec.com