1. All products
  2. Primer DIE GELBE, fine
EUR
Claytec

Primer DIE GELBE, fine

10 Liter bucket

Fine grain primer containing dispersion to prepare uneven substrates. Perfect as a base coat for fine surfaces. Content yields approx. 50 m²

98.83 € 98.83 EUR 98.83 €

83.05 €

(9.88 € / L)


    Downloads

    * all prices incl. VAT, excl. Shipping costs (these are displayed in the shopping basket).

    To be successful, your content needs to be useful to your readers.

    Conluto clay building board, 22 mm thick



    Fine-grained primer

    by Claytec

    Liquid primer with a fine grain, for use before applying fine clay finishing plaster and YOSIMA clay designer plaster. The YELLOW primer provides a fine-grained key, reduces and evens out absorbency and protects plasterboard and other building boards from moisture from the clay plaster application.

    Composition: Limestone powder, water, water glass, clay, dispersion < 5% (improves adhesion properties and application reliability), perlite, cellulose fibres, methylcellulose, xanthan. Grain size 0-1 mm

     

      Primer for finer coats

    Coverage: Item no. 13.425 10 l bucket, liquid, for approx. 50 m2; item no. 13.420 5 l bucket, liquid, for approx. 25 m2.

    Storage: Can be stored in sealed containers in a dry, cool (frost-free!) place for at least one year. Reseal opened containers tightly.

    Preparation: As a rule, stir thoroughly undiluted; up to 5% water may be added. The substrate must be load-bearing, firm and clean. Substrate temperature 5-25 °C. Remove old, poorly adhering coats of paint and wash off water-soluble paints. Brush down sanding plasters and then wash them. Prepare heavily sanding substrates with CLAYTEC deep-penetrating primer and consolidant. Fresh gypsum, lime or cement plasters must be at least 10 days old and dry. Highly alkaline substrates, e.g. fresh concrete surfaces with a sinter skin, must be professionally fluated (neutralised), and residues of formwork release oil must be washed off. CLAYTEC primers have no consolidating or sealing effect.

    Application: Apply generously over the entire surface with a short-pile roller or a brush.

    Drying: The next coat may only be applied once the surface has dried completely, after 48 hours at the earliest. Drying time depends on temperature and humidity.

    Handelsmarke Adresse
    Claytec GmbH & Co. KG
    Nettetaler Str. 113, 41751 Viersen, Deutschland
    +49 2153 9180
    auftrag@claytec.com