DIE WEISSE primer
by Claytec
Liquid primer without grain, for use before applying Claytec clay paint, clay brush-on plaster and other clay paint fillers. Substrates are clay plasters and others as required. The WHITE primer ensures that the clay plaster is not dissolved by and mixed with the paint coat. It creates a firm base for later repeat coats.
Composition: Limestone powder, water, water glass, clay, polymer dispersion < 5% (to improve adhesion properties and application reliability), perlite, cellulose fibres, methyl cellulose, xanthan.
Pack sizes, coverage: Art. No. 13.415 10 l bucket, liquid, for approx. 100 m². Art. No. 13.410 5 l bucket, liquid, for approx. 50 m².
Storage: Can be stored in sealed containers in a dry, cool (frost-free!) place for at least one year. Reseal opened containers tightly.
Preparation: As a rule, stir thoroughly undiluted; up to 5% water may be added.
Substrate: The substrate must be load-bearing, firm and clean. Substrate temperature 5-25 °C. Remove old, poorly adhering coatings; wash off water-soluble coatings. Brush down dusting plasters and wash them afterwards. Prepare heavily dusting substrates with CLAYTEC Deep Primer and Consolidant. Fresh gypsum, lime or cement plasters must be at least 10 days old and dry. Highly alkaline substrates such as fresh concrete surfaces with laitance must be professionally fluosilicate-treated (neutralised), and residues of formwork oil must be washed off. CLAYTEC primers have no consolidating or sealing effect.
Application: Apply generously over the entire surface with a short-pile roller or a brush.
Drying: The next coat may only be applied once the surface has dried completely, after 48 hours at the earliest. Drying time depends on temperature and humidity.
