Wood fibre insulation board for interior insulation of exterior walls.
Bulk density p: ~130 kg/m³
Nominal value thermal conductivity at 40 - 100 mm 0.039 W/mK
Compressive stress/strength >50 kPa
Tensile strength perpendicular to the board plane > 7.5 kPa
Blunt edge formation
1200 / 500 mm

Paint with clay paint! Get our starter kit in advance and decide on the colour at your leisure. In the meantime, you can start working with the primer! The kit contains:
1 brochure with colour chart
1 ceiling brush
1 casein primer
1 adhesive tape with masking paper
1 rice paper adhesive tape

High quality all-round wall paint for indoor use. Contents 5,2 kg of paint powder, sufficient for ~32,5 m², depending on the subsurface.

Anfrage für einzelne Bauvorhaben. Handel von handelnden Händlern, keine widerverkaufenden Handwerker!

Real slaked lime paint, high-quality wall paint for inside. Content is sufficient for ~ 80 to 50 m²

Titanium dioxide-free active silicate paint for colour frames suitable for listed buildings. Extremely permeable to water vapour, weather- and UV-resistant.
Consumption: approx. 0.13 l/m² per coat on a smooth substrate.

Ready-to-use, one-component water glass facade paint with absolutely mineral profile.
Consumption: approx. 0.12 l / m² on smooth substrate

Levelling, quartz-filled primer and intermediate coat in the Beeckosil system on substrates with minor structural defects or hairline cracks.
Consumption: approx. 0.24 kg / m² on smooth substrate

Levelling, quartz-filled primer and intermediate coat in the Beeckosil system on substrates with minor structural defects or hairline cracks.
Consumption: approx. 0.24 kg / m² on smooth substrate

One-component sol-silicate system for high-quality facade design, also on synthetic resin-containing and water-repellent substrates, such as weathered dispersion and silicone resin coatings. Consumption: approx. 0.13 - 0.14 l/m² per coat on a smooth substrate.

Slurry primer in the Beecko-SOL system for facades. Consumption: approx. 0.25 kg / m² on a smooth substrate.

Titanium dioxide-free active silicate paint for colour frames suitable for listed buildings. Extremely permeable to water vapour, weather- and UV-resistant.
Consumption: approx. 0.13 l/m² per coat on a smooth substrate.

Slurry primer in the Beecko-SOL system for facades. Consumption: approx. 0.25 kg/m² on smooth surfaces.

The Beeck stand oil colour fan was specially developed for traditional linseed oil-based wood coatings and consists of 10 basic colours and 84 special colours with mineral pigments and white
Purchase with a 4-week right of return!

Opaque pigmented linseed oil stand oil paint for professional interior finishes.
Consumption: approx. 0.09 l/m² per coat on a smooth substrate

Silk matt, diffusible stand oil wood stain for interior use.
Consumption: approx. 0.07 l / m² per coat

Silk matt, diffusible stand oil wood stain for interior use.
Consumption: approx. 0.07 l / m² per coat

Silk matt, diffusible stand oil wood stain for interior use.
Consumption: approx. 0.07 l / m² per coat

Silk matt, diffusible stand oil wood stain for interior use.
Consumption: approx. 0.07 l / m² per coat.

Semi-transparent active silicate glaze for mineral surfaces. Consumption: approx. 0.10 l / m² glaze, with BEECK SOL-Fix

Beautiful radiant colours especially for interior design.
Purchase with 4-week return policy!