Hart-PVC gefertigt nach DIN 16941.
Länge 200 cm,

Die GUTEX Streichdichtung ist eine strukturviskose Funktionsbeschichtung mit kapillarbrechendem Charakter. Sie wird als partielle Beschichtung zur Verringerung der Feuchteaufnahme über die Oberfläche der GUTEX Holzfaserdämmstoffe eingesetzt. Besonders relevant sind feuchtekritische Anschlussdetails. Die Anwendung erfolgt vor der Putzbeschichtung sowie im Implio Fenster- und Türanschluss-System.

Zementgebundener, faserarmierter Trockenmörtel (anorganischer Mörtel)

Kartuschen-Dichtmasse zum Verfüllen von verlegebedingten Fugen bei den Putzträgerplatten GUTEX Thermowall und GUTEX Thermowall-gf.

Thermo screw anchor 8 mm, for fastening GUTEX insulation boards in concrete, bricks, solid sand-lime bricks, hollow blocks made of lightweight concrete, perforated and hollow-hole bricks, aerated concrete. Impact depth at least 25 mm in load-bearing substrate.

Um Kältebrücken zu reduzieren, nutzen Sie den GUTEX WDVS Thermoschlagdübel mit Verschlusselement

Integrated protection against moisture
Waterproof in accordance with abP, test certificate number: P-1201/633/18 MPA-BS
Highly water-repellent

Verbrauch 0,5 kg/m³

zur Montage der Implio Laibungsplatten, Keilplatten und Raffstorekasten

Lighter plaster base board with high insulation performance for the Thermowall ETICS
Blunt edge
0.48 m² per board
Areas of application: full-surface mineral or solid wood substrates

Heavy clay brick with high holes, large 2df format for quick and efficient building of interior walls. DIN 18945, AK II, 224 pieces / EW-Pal, gross density 1,600kg / m³
Block 24.0 × 11.5 × 11.3 cm

Set aus Farbwalze, Bügel, Teleskopstab, Abklebematerial, Pinsel und Farbe

Sturdy plastic design, blue

Basis Ste aus Profi Malerrolle, Bügel, und passendem Teleskop Griff.

Reinforced sub-roof/sub-roof membrane, with self-adhesive zones
Used as a diffusion-open underlay or underlay on formwork, MDF and wood fibre underlay boards as well as all thermal insulation materials, incl. blown-in insulation materials.
sd value moisture-variable < 0.02 m, 170 g/m²
1 roll = 75 m² (1.5 x 50 m)

480 mm × 130 mm, professional design in steel with untreated natural wood handle, 10 mm serration.

Finish coat plaster for the finest surfaces ready for painting. Natural brown can also be used as the end result. Thin layers possible from 1 to 3 mm. Range with 25 kg ~ 6 to 8 m²

Ultra-fine filler for producing Q4 surfaces made of clay, sandable, can be smoothed over several times. Coverage approx. 20 m² with 1 mm layer thickness
Consumption as joint filler: 300g / m²

Special clay surface technique, pre-colored clay mixture, dry powder to mix with water.
Consumption: 1 kg per 1 m².

Dry clay plaster mortar for paint-ready surfaces. Dry mortar made of pure clay, sand and straw.
Consumption at a thickness of 1 cm: 15 kg per m².

Fired clay plate with tongue and groove for inserting the metal composite pipe. As a base plate for floorboards, parquet, tiles, etc.
400 x 370 x 40 mm = approx. 0.15 m² per plate