Schimmelknacker
Mineral, biocide-free mould treatment: permanently encapsulates fungal spores, mineralises the surface and gives it long-lasting high alkalinity. Vapour-permeable, non-yellowing, non-flammable, free of solvents and organic binders. Overcoat afterwards with lime paint. Coverage: on plaster (diluted 1:1) approx. 0.1–0.2 l/m², on dispersion paints (undiluted) approx. 0.06–0.1 l/m² – 250 ml ≈ 1–4 m², 1 l ≈ 5–16 m².
KREIDEZEIT Schimmelknacker is a biocide-free, mineral treatment for affected surfaces: it encapsulates fungal spores and binds them permanently, mineralises the surface and gives it a long-lasting high alkalinity. This helps to inhibit the further spread of mould.
Schimmelknacker does not provide colour coverage and should be overpainted with KREIDEZEIT Lime Putty Paint when convenient. It adheres to almost any substrate – also suitable for treating affected cupboard back panels. The cause of the moisture must also be eliminated.
Properties
- biocide-free, mineral
- encapsulates fungal spores and binds them permanently
- mineralises the surface, long-lasting high alkalinity (pH 11.5)
- highly vapour-permeable: sd value < 0.02 m at 1:1 dilution (DIN EN ISO 12572)
- non-yellowing, non-combustible
- free from solvents, organic binders and synthetic resins
- adheres to almost any substrate
- vegan
Suitable substrates
Untreated mineral plasters, concrete, stone, masonry, synthetic emulsion paints and firmly bonded wall paints based on natural raw materials.
Use & Application
On absorbent plaster: Dilute Schimmelknacker 1:1 with water and carefully apply one or two coats with a brush to the affected area and approx. 50 cm of the surrounding area.
On emulsion paints: Apply undiluted, carefully, with a brush.
Aftercare: Once dry, brush off any whitish efflorescence if necessary. When convenient, paint over the surface with KREIDEZEIT Slaked Lime Paint.
Temperature: Application and drying between 5 and 30 °C.
Technical data
| Operating principle | mineral encapsulation of the spores + high alkalinity |
| pH | 11,5 |
| sd value | < 0.02 m at 1:1 dilution (DIN EN ISO 12572) |
| Biocides | contains no |
| Overpainting | with KREIDEZEIT lime putty paint |
Full declaration
Water, silicon dioxide (for further constituents see safety data sheet). Please observe the complete product information (technical data sheet and safety data sheet) when applying.
Note: Alkaline – protect eyes and skin, cover adjacent building components (glass, metal). The cause of the moisture must be eliminated. Observe the safety data sheet.
Frequently asked questions
How does Schimmelknacker work?
It encapsulates the fungal spores in a mineral layer and binds them permanently; the high alkalinity of the mineralised surface helps to inhibit further spread. The underlying cause (thermal bridge, ventilation, moisture) must also be remedied.
Do I need to paint over it?
Schimmelknacker is not opaque. When convenient, paint over it with KREIDEZEIT Slaked Lime Paint.
Does Schimmelknacker contain biocides?
No. It works on a purely mineral basis, without biocides, solvents or synthetic resins.
On which surfaces can I use it?
On mineral plasters, concrete, stone, masonry, emulsion paints and firmly bound paints based on natural raw materials – also on the back panels of cupboards.
Handelsmarke Adresse
Kreidezeit Naturfarben GmbHKassemühle 3, 31195 Lamspringe, Deutschland
+49 5060 6080650
info@kreidezeit.de