A powerful batch mixer that is particularly suitable for special mixes made from different components.
50 Hz

Batch mixer for special mixes from various components.
Ideal for clay plaster, lime, screed, adhesive, filler compound and more.
Can be connected to a PFT mortar pump.

Technical Data:
230 V, 1 Ph, 50 Hz | 2.0 kW
Drive motor: 2.0 kW, 42 rpm
Mixing capacity: 50 – 60 l/batch
Max. aggregate size: 8 mm
Mixing drum: steel
Fill height: 1,190 mm | Outlet height: 640 mm
Dimensions (L/W/H): 720/690/1,190 mm
Total weight: 80 kg

Features:
Central on/off switch with emergency stop
Safety cut-out for drum lid
Segment slide in drum base for easy emptying
2 transport wheels | Bag opener on protective grid

Mixing pumps – also known as plastering machines or mortar pumps – are a core competence of PFT. The PFT G 4 gen25 is robust and durable, with high area output, high value retention and reliable performance for a wide range of users. It offers maximum flexibility for different requirements on walls, ceilings and floors.

Features (code letters):
r = rubber mixing tube
p = booster pump / water pump
s = level sensor probe
switch = 230/400 V switchable

Areas of application: gypsum plaster, lime-gypsum plaster, cement plaster, insulating compounds, lime-cement plaster, fango compounds, insulating plaster, chasing mortar, masonry mortar, self-levelling screed, self-levelling filler, adhesive and reinforcing mortar.

Basic technical data (all variants):
Drive: 6.05 kW pump motor, 400 rpm, 2-stage gearbox with tilt switch
Mixing spiral: BIONIK G 4 machine plaster
Filling height: 910 mm | Hopper capacity: 145 litres (~5 bags of 30 kg each)
Dimensions (L/W/H): 1,200/720/1,530 mm
Water connection: Geka DN19 (3/4"), 2.5 bar operating pressure

The variants differ in pump unit, delivery rate, supply voltage and basic accessory equipment (see variant designation).

Scope of delivery: The basic machine (all variants) includes a chassis with swivel/brake castors, BIONIK mixing spiral/mixing tube, mortar outlet with pressure gauge, water connection Geka DN19 (3/4") and control panel with start/stop (machine/remote control). Depending on the variant, additionally included as standard: mortar hose RONDO DN25 (10 m), air compressor (COMP P-200 or COMP M-250), spray/fine plaster gun and water/air hose, in some cases water pump AVO 500 for pressure boosting and water flow meter. The exact basic accessory equipment differs for each variant (see variant designation/technical data sheet).

The compact PFT BOLERO is a combined mixing, pumping and spraying machine for small construction sites. It runs on standard single-phase mains power. With the mixing spiral rotating anticlockwise, the material is mixed continuously; with clockwise rotation, the feed pump is engaged. The BOLERO shows its particular strength with materials that require intensive mixing and are applied discontinuously: special mortars, bentonite, textured and acoustic plasters, levelling compounds and self-levelling fillers.

Technical data (both versions):
Mixer BOLERO centro, pump unit D 4-2 (9-10 l/min, 20 bar)
Mortar outlet with mortar pressure gauge, DN35 male coupling
Filling height: 950 mm | Hopper capacity: 68 litres (~2.2 bags of 30 kg)
Dimensions (L/W/H): 800/700/1,500 mm | Total weight: 112 kg
Conveying distance: up to 20 m (DN25) / up to 30 m (DN35)
Scope of delivery: base machine with BOLERO centro agitator, mortar outlet with pressure gauge (DN35), 2 castors/wheels. Water connection, mortar hose, external vibrator, water pump, air compressor and spray gun are NOT included with any version and must be ordered separately as accessories.

Feed pumps of the PFT SWING series convey pumpable factory-made dry mortars (lime/cement-based) directly to the point of application. Compact, manoeuvrable and designed for professional use on site. The "airless c" variants are designed for paint/coating applications with high spray pressure (up to 140 bar) instead of conventional mortar conveying.

Material hopper: plastic | Mortar outlet with mortar pressure gauge or pressure sensor with digital display (airless)
The variants differ in pump unit, output, supply voltage and equipment (see variant designation).

Scope of delivery: The basic SWING L variants comprise only the feed pump itself (chassis, pump unit, plastic material hopper, mortar outlet with pressure gauge, wheels/castors) – water connection, mortar hose, air compressor, spray gun and water/air hose are NOT included in the scope of delivery and must be ordered separately as accessories. A fully equipped set with compressor, hoses and spray gun is available as the template "Putzmaschine SWING L FC-400V, ready to use".

Feed pumps in the PFT ZP 3 series convey pumpable lime/cement mortars to the point of application. Material hopper: sheet steel. The variants differ in size, pump unit, delivery rate/conveying distance and equipment (see variant designation).

Basic data: filling height 640mm, hopper capacity 85 litres, dimensions 1,800/600/670mm.

Scope of delivery: basic machine with pump unit, sheet-steel hopper, mortar outlet with pressure gauge, castors. Variants with the suffix "with accessories" additionally include as standard: mortar hose RONDO DN35 (10 m), air compressor, spray/fine-plaster gun DN35 and water/air hose DN12. With all other variants, these accessories are NOT included.

Feed pumps in the PFT ZP 3 series convey pumpable lime/cement mortars to the point of application. Material hopper: sheet steel. The variants differ in size, pump unit, delivery rate/conveying distance and equipment (see variant designation).

Basic data: filling height 620mm, hopper capacity 130 litres, dimensions approx. 2,255/720/745mm, connection 400V/3Ph/7.5kW.

Scope of delivery: basic machine with pump unit, sheet-steel hopper, mortar outlet with pressure gauge, castors. Mortar hose, air compressor, spray/fine-plaster gun and water/air hose are NOT included with the basic variants; only the "with accessories" variant comes fully equipped as standard.

Feed pumps in the PFT ZP 3 series convey pumpable lime/cement mortars to the point of application. Material hopper: sheet steel. The variants differ in size, pump unit, delivery rate/conveying distance and equipment (see variant designation).

Basic data: filling height 620mm, hopper capacity 130 litres, connection 400V/3Ph/13kW, pump unit 2 L 8 (180 l/min, 20 bar), conveying distance up to 150m with DN65.

Scope of delivery: basic machine only (pump unit 2 L 8, sheet-steel hopper, mortar outlet with pressure gauge DN65, castors). Mortar hose, air compressor, spray/fine-plaster gun and water/air hose are NOT included with any variant and must be ordered separately as accessories.

Feed pumps in the PFT ZP 3 series convey pumpable lime/cement mortars to the point of application. Material hopper: sheet steel. The variants differ in size, pump unit, delivery rate/conveying distance and equipment (see variant designation).

Combination unit consisting of a feed pump (variable-speed gearbox) and integrated mixer (mixer motor 2.2kW). 'vario' without mixer = feed pump only. Basic data: filling height 630mm, hopper capacity 130 litres, connection 400V/3Ph/5.5kW, conveying distance up to 60m with DN50.

Scope of delivery (all variants): pump/mixer combination unit (pump unit RENDER STAR, mixer motor 2.2 kW), mortar hose RONDO DN35 (10 m), air compressor COMP M-250 handy, spray/fine-plaster gun DN35, water/air hose DN12, sheet-steel hopper, mortar outlet with pressure gauge and castors – supplied complete and ready for use from the factory.

Mixing pumps of the PFT RITMO series continuously and fully automatically process all machine-applicable factory-made dry mortars based on gypsum, lime and cement with water. One-person mixing pump, can be fed with bucketed or bagged material, usable as a mixing pump or as a pump only.

'plus' variants: filling height 930mm, hopper capacity 45 litres (~1.5 bags), dimensions 915/600/1,450mm, total weight 135kg, frequency converter (FC) for infinitely variable speed control.
'smart' variants: entry-level machine, low weight (~95kg), dimensions 920/600/1,420mm, compact and easy to transport.

Scope of delivery: Included as standard with the 'plus' variants: mortar hose RONDO DN25, external vibrator A5 (230V), water flow meter, air compressor COMP R-80, fine plaster/spray gun, water/air hose and connection cable. Included as standard with the 'smart' variants: mortar hose RONDO DN25, air compressor COMP R-80, fine plaster/spray gun and air hose – external vibrator, water pump and connection cable are NOT included here and cannot be retrofitted. For details of each variant, see the technical data sheet.

Mixing pumps of the PFT RITMO series continuously and fully automatically process all machine-applicable factory-made dry mortars based on gypsum, lime and cement with water. One-person mixing pump, can be fed with bucketed or bagged material, usable as a mixing pump or as a pump only. Larger series with higher delivery rate.

Basic data: filling height 850–1,010mm, hopper capacity 70 litres (~2.3 bags), dimensions 1,300/700/1,400mm, mixing spiral BIONIK RITMO XL machine plaster.

Scope of delivery (basic variant FC-230/400V, for further variants see data sheet): mortar hose RONDO DN25 (10 m), water pump AV 700 for pressure boosting, water flow meter, air compressor COMP M-250 handy, fine plaster/spray gun DN25, water/air hose DN12 (11 m). NOT included: external vibrator and connection cable (available separately as accessories).