Ready-mixed lime concrete. Vapour-permeable concrete mortar without cement. For use in historical buildings and buildings made with natural building materials.

Used as non-load-bearing paving, cellar floors, or for the restoration of historical floor slabs.
Pumpable with screed pumps – Grain size up to 10 mm!

- 50 bags / pallet (1250 kg)
- Layer thickness 15 to 25 cm (For thicknesses greater than 25 cm, apply in several layers of 15 cm each)
- 1 bag of 25 kg yields 10 litres of ready mix
- 2500 kg = 1 m³ of finished concrete

Ready-to-use, biocide-free oil glaze in 9 classic wood tones for wood indoors and out – windows, doors, façades, timber framing, fences, garden furniture. High linseed-oil content, stays elastic, lightfast earth pigments for UV protection. Vegan. Coverage: approx. 0.05–0.10 l/m² per coat – 750 ml ≈ 12 m², 2.5 l ≈ 40 m² per coat.

Low-cost, traditional and biocide-free surface treatment for softwood. Outdoors it accelerates the natural silvering process (leaching out the soft wood components); indoors it gives a light, matt tone. Apply undiluted by brush.

Ready-to-use lime paint to DIN 55945 for interior and exterior – without synthetic resin binders and without titanium white. Highly vapour-permeable, strongly alkaline, suitable for damp rooms. Tintable with KREIDEZEIT earth and mineral pigments. Coverage: approx. 0.15 l/m² per coat (usually 2 coats recommended) – 1 l ≈ 6.5 m², 5 l ≈ 33 m², 10 l ≈ 65 m² per coat.

Impact sound improvement of up to 30 dB depending on the floor structure
6 mm thick
86 x 59 cm = 0.5 m² per panel
Weight per panel 0.8 kg
Surface weight 1.6 kg/m²
Simply cut to size with a cutter, as an intermediate layer under e.g. parquet, on concrete, screed, wooden floors, installation planks or screed elements

Moisture-regulating, open to vapour diffusion, additional thermal insulation, quick installation.

Anwendungsfreundliches Beschichtungs- und Festigungsmittel auf natürlicher Basis für saugfähige, poröse mineralische Untergründe wie Zement- und Anhydritestrich, Beton, unglasierte Keramik- und Cotto-Fliesen. Verbrauch: ca. 0,08 – 0,11 l pro m² und Auftrag

Anwendungsfreundliches Beschichtungs- und Festigungsmittel auf natürlicher Basis für saugfähige, poröse mineralische Untergründe wie Zement- und Anhydritestrich, Beton, unglasierte Keramik- und Cotto-Fliesen. Verbrauch: ca. 0,08 – 0,11 l pro m² und Auftrag

Anwendungsfreundliches Beschichtungs- und Festigungsmittel auf natürlicher Basis für saugfähige, poröse mineralische Untergründe wie Zement- und Anhydritestrich, Beton, unglasierte Keramik- und Cotto-Fliesen. Verbrauch: ca. 0,08 – 0,11 l pro m² und Auftrag

Diffusionsoffene, pigmentierte Holzveredelung für Sichthölzer im Innenbereich. Verbrauch: ca. 0,07 l/m² und Anstrich auf gehobeltem Nadelholz

Water-repellent, breathable oil stain for exterior use – for dimensionally stable wood (windows, exterior doors) as well as wood cladding, fences and log cabins. Silky sheen, 15 standard shades, intermixable. Consumption: approx. 0.07 l/m² per coat on planed softwood.

Weiß pigmentiertes Hartöl ohne zugesetzte Lösemittel für Holz- und Korkoberflächen im Innenbereich. Erzeugt eine gekälkte, helle Holzoptik bei erhaltener Maserung.

Interior hard oil for all normally used wood and cork surfaces, or as a primer on absorbent surfaces before treatment with oil or wax.

Das ohne zugesetzte Lösemittel hergestellte Holzöl schützt die Flächen vor den Einflüssen von Schmutz und Wasser und schafft feuchteregulierende Oberflächen. Reichweite: 11 m² pro Anstrich

The silk gloss Woodstain Classic No. 930 is suited for coloured and colourless transparent coatings on wood surfaces, indoors and outdoors. The colour tones can be freely mixed with each other. The colourless variant provides no UV protection and should not be used outdoors.

Silk-gloss woodstain for interior and exterior wood coatings.

The silk gloss Woodstain Aqua No. 160 is water-thinnable and solvent-free, suited for coloured and colourless transparent coatings on wood surfaces indoors and outdoors. The colour tones can be freely mixed with each other. The colourless variant provides no UV protection and should not be used outdoors.

Linseed oil varnish for indoor wood worktops, water-repellent and honey-toning impregnation

Dye stain made from dragon's blood resin and alcohol for a bold red wood colouring, intensity reducible with plant alcohol

Water-based dye stain with catechu for intense brown wood colouring