0.77 m² per panel
Board size 135 x 57.5 cm
best wood fibre insulation mat for insulating roofs, partition walls, ceiling insulation or exterior walls
Nominal value thermal conductivity λD 0.036 W/mK
Bulk density ρ ~ 50 kg/m³
Easy to cut, low-dust, strong clamping force

Clay paint for painting clay walls and other interior walls, free of additives, pure clay paint as a dry powder to be mixed with water. Consumption 75 to 130 g paint powder / m².

As a universal plaster for base and top plaster, suitable for hay fever allergy sufferers as it does not contain grass. Application up to 15 mm thickness. Contents 600 kg, sufficient for 35 m² with a 1 cm thickness.
Contents 1200 kg, sufficient for 72 m² with a 1 cm thickness

Dry clay plaster without plant fibers, suitable as a base coat or topcoat up to a layer thickness of 15 mm.

Consumption:

1000 kg is sufficient for 68 m² at a thickness of 1 cm
25 kg is sufficient for 1.7 m² at a thickness of 1 cm

Clay plaster mortar with chopped straw for plastering masonry, wall heating, or a suitable plaster carrier. Maximum layer thickness: 3 cm per application.
Consumption: 45 kg per m² at a layer thickness of 3 cm.

Clay bricks for brickwork in compartments or for non-load-bearing interior walls, stacking technique.
2 DF: 224 bricks per pallet, consumption approx. 33 bricks / m².
DF: 448 bricks per pallet, consumption approx. 66 bricks / m²
NF: 336 bricks per pallet, consumption approx. 50 bricks / m²

Approved for masonry work in timber frames that will later be plastered with lime plaster, or as a facing shell for interior insulation.

NF = Standard size 24.7 x 12.0 x 6.9 cm
336 bricks per pallet
3 DF = 3x Thin format 24.0 x 17.5 x 11.3 cm
224 bricks per pallet
2 DF = 2x Thin format 24.0 x 11.5 x 11.3 cm
350 bricks per pallet
Consumption calculator see datasheet.

Heavy-duty masonry mortar for laying clay blocks and soft bricks. 1300 kg of earth-moist clay masonry mortar makes approx. 750 litres of masonry mortar.

Plaster primer for smooth and non-homogeneous substrates. Primer for clay plaster on gypsum boards and gypsum fiber boards, but also on solid substrates with mixed surfaces and old coatings.Consumption: 9 m²/l

Coloured filler for the production of Q4 surfaces made of clay, sandable, can be smoothed over several times. Coverage approx. 20 m² with 1 mm layer thickness
Consumption as joint filler: 300g / m²

Clay-based adhesive mortar for bonding insulation boards, clay building boards, for fabric layers on clay building boards or softwood fiberboards. Application thickness 1-5 mm.
Consumption: 7 kg / m² with a layer thickness of 5 mm

Our clay colour with added plaster. For a healthy indoor climate and a stylish, textured look. Simply mix with water, free from additives and breathable.
Consumption: approx. 140 - 240 g/m²

Thin-layer clay mixture for creative interior design in 18 natural shades.
Consumption: 3 kg / m² with a layer thickness of 2 mm.

Earth-moist clay plaster mortar with chopped straw for creating a paint-ready surface, maximum topcoat thickness: 10 mm.
Consumption: 16 kg / m² at 10 mm thickness

Earth-moist clay plaster mortar with chopped straw for plastering masonry, wall heating, or a suitable plaster carrier. Maximum layer thickness: 3 cm per application.
Consumption: 48 kg per m² at a layer thickness of 3 cm.

Ecological deep primer for silicification of sanding substrates, levelling of absorbencies. For old plaster, gypsum, plasterboard or emulsion paints. Lithium water glass
Mix 1 : 1 with water

Extremely robust plaster thrower for clay or lime plaster.
The delivery includes the plaster thrower, metal case, fabric compressed air hose with Geka couplings, 3 different mouthpieces and various nozzles.
The device can be converted into a plaster thrower for hemp lime.

Capillar conductive interior insulation, mineral

Stone replacement mortar, preserving and reproducing stone.
For limestone or brick
Material can be tinted by adding pigments to match the colour of your stone. Optional surface protection with Beeck stone glaze, colourless, or slightly glazed to perfectly match the old patina.
Can be applied for up to 48 hours
from 1 to 10 cm layer thickness

Light-clay insulation plaster, to be used as an insulating leveling layer or interior insulation. Plaster thickness: 5 to 20 mm. With a 1 cm plaster application this amount is sufficient for approx. 75 m² plastered area.

Wood fibre insulation board for interior insulation of exterior walls.
Bulk density p: ~130 kg/m³
Nominal value thermal conductivity at 40 - 100 mm 0.039 W/mK
Compressive stress/strength >50 kPa
Tensile strength perpendicular to the board plane > 7.5 kPa
Blunt edge formation
1200 / 500 mm