Synthetic resin-free interior coating in a historical ambience with an attractive matt effect.
Consumption: approx. 0.12 l/m² per coat on a smooth substrate

Single-component, pure silicate paint. Suitable for water-wettable, porous mineral substrates.
Consumption: approx. 0.12 - 0.18 l/m²

4,50 long cross section

Silicification-active, water vapour permeable interior silicate paint for historic interiors.
Consumption: approx. 0.12 l / m² on a smooth substrate

Silicate bonding bridge with textured grain for substrates with weak silicification. Natural white pigmented, semi-opaque.
Consumption: approx. 0.23 kg/m² on a smooth substrate.

One-component, slurry-mixed primer and intermediate coat in the BEECK Monocrystalline system, pure silicate paint. Consumption: approx. 0.24 kg/m² on a smooth substrate

Reversible protective coating for historic interiors.
Consumption: approx. 0.14 l / m² on a smooth substrate

Active substance-free oil primer for interior use.
Consumption: approx. 0.08 l / m² on planed softwood.

Ready-to-use interior silicate paint for all load-bearing interior substrates, such as lime plaster, concrete, fabric and woodchip wallpaper.
Consumption: approx. 0.10 - 0.15 l / m² on a smooth substrate

Titanium dioxide-free, open-pored sol-silicate paint for interior use.
Consumption: approx. 0.14 l/m² per coat on a smooth substrate

Opaque chalk-white distemper based on a traditional recipe for reversible interior coatings.
Consumption: approx. 0.12 l/m² per coat on a smooth substrate

Wood-fired, pure lime putty for restoration and church painting, lime white. Consumption:
Consumption: approx. 0.05 kg / m² on a smooth substrate

High-quality, shredded hemp for various applications.
200 liters / 20 kg bag; Bulk density ~100 kg/m³; Size 2 to 25 mm

- BATICHANVRE® PLUS and hemp shives mixed 2:1 for wall insulation
- In the IsoHemp system for leveling out uneven surfaces, individual shapes, and layer thicknesses with Isphemp proKalk
- conluto building clay and hemp shives mixed for lightweight clay

Colourless, silica sol-based consolidant for mineral building materials in interior and façade areas. Water-thinnable, solvent-free.
Consumption: approx. 0.4 to over 3 l / m² with multiple saturation

Removable primer in the BEECK Protect system
Consumption: approx. 0.10 l / m² on smooth, normally absorbent substrate

Ready-mix tile adhesive based on natural Saint-Astier® hydraulic lime. Ideal for laying tiles, flagstones, and terracotta on indoor floors (old buildings/new builds/eco-construction). With extended workability and easy application.

Coverage 3 to 5 m² per 25 kg bag.

Fired clay plate with tongue and groove for inserting the metal composite pipe. As a base plate for floorboards, parquet, tiles, etc.
400 x 370 x 40 mm = approx. 0.15 m² per plate

Clay ceiling fill, sieve granulate with grain size Ø 2 - 10 mm; residual moisture 10 - 14 %; bulk density approx. 1000 - 1200 kg/m³ depending on compaction

Permanent fastening for triangular battens in half-timbered structures. The screws are approved for use in tannin-containing woods such as oak. The triangular battens must be pre-drilled to avoid splitting. The special screw geometry prevents the screw from tearing out too quickly in the hard oak. With building authority approval.

Underlay strips for sound decoupling, 10 cm wide
10 rolls á 10 m