Fine fiberglass fabric as surface reinforcement for plaster, L = 1m

for bridging small cracks or as joint reinforcement on panel materials

Masonry mortar for bricklaying the light earth bricks, makes 20.5 l

Mortar for reinforcing panel materials and for producing thin-layer plasters. Content is sufficient for 5 m² with an application thickness of 5 mm.

Suitable for hand presses, for filling with Claytec Clay joint-filler (hand press not included)

Deep primer containing dispersion for sandy substrates

Deep primer containing dispersion for sandy substrates

Clay for bricklaying or plastering clay ovens and fireplaces

An all-rounder among limes, wherever special properties are needed.

Electrically heated Wall heating panel, dimensions: 80 cm x 62.5 cm x 25 mm;
corresponds to 0.5 m² heating surface, 230 V, heating power approx. 130 W.

Electrically heated Wall heating panel, dimensions: 160 cm x 62.5 cm x 25 mm;
corresponds to 1 m² heating surface, 230 V, heating power approx. 220 W.

Electrically heated Wall heating panel, dimensions: 200 cm x 62.5 cm x 25 mm;
corresponds to 1,25 m² heating surface, 230 V, heating power approx. 260 W.

Water-heated wall panel heater. Dimensions: 80 cm x 62.5 cm x 25 mm;
corresponds to 0.5 m² heating surface,
max.operating pressure 10 bar, max.temperature 95 ° C

Water-heated wall panel heater. Dimensions: 160 cm x 62.5 cm x 25 mm;
corresponds to 1,00 m² heating surface,
max.operating pressure 10 bar, max.temperature 95 ° C

Water-heated wall panel heater. Dimensions: 200 cm x 62.5 cm x 25 mm;
corresponds to 1,25 m² heating surface,
max.operating pressure 10 bar, max.temperature 95 ° C

Ceiling heating/cooling board. Dimensions: 80 cm x 62.5 cm x 25 mm; corresponds
to 0.5 m² heating surface, max. operating pressure 10 bar, max. temperature 95 ° C,
contains dispersion (<1%)

Ceiling heating / cooling board. Dimensions: 160 cm x 62.5 cm x 25 mm;
Corresponds to 1,00 m² heating surface, max. Operating pressure 10 bar,
max. Temperature 95 ° C, contains dispersion (<1%)

Ceiling heating / cooling board. Dimensions: 200 cm x 62.5 cm x 25 mm; corresponds to
1,25 m² heating surface, max. Operating pressure 10 bar, max. Temperature 95 ° C,
contains dispersion (<1%)

Ready to install, water-heated system. Dimensions: 80 cm x 60 cm;
corresponds to 0.5 m² heating surface,
max.operating pressure 10 bar, max.temperature 95 ° C

Ready to install, water-heated system. Dimensions: 160 cm x 60 cm;
corresponds to 1,00 m² heating surface,
max.operating pressure 10 bar, max.temperature 95 ° C

Ready to install, water-heated system. Dimensions: 200 cm x 60 cm;
corresponds to 1,25 m² heating surface,
max.operating pressure 10 bar, max.temperature 95 ° C