To make brushed clay plaster out of clay paint. Content is enough for 5 kg of clay paint.

Effect additive for Conluto clay plaster
approx. 100 g per 25 kg clay plaster

Effect additive for Conluto clay plaster
approx. 100 g per 25 kg clay plaster

Effect additive for Conluto clay plaster
100 g per 25 kg clay plaster

Effect additive for Conluto clay plaster
approx. 100 g per 25 kg clay plaster
finely ground pearl shells

Transparent primer for paints on clay plaster or for fixing sandy surfaces on clay plaster. Makes 8 liters of finished primer for 40 - 60 m².

Printed overview of the Conluto colour worlds, colour card, information and instructions as well as suggestions for designing with clay

Reinforcement fabric, mesh size 7 x 7 mm, 160 g/m², white, 50 m² per roll
Alkali-resistant finish, approved for indoor and outdoor use according to certificate ETAG 004

Reinforcement fabric made of glass fiber for exterior and interior plasters. Alkali-resistant, without the addition of plasticizers, non-slip, dimensionally stable and rot-proof.

Printed overview of all Conluto products, with lots of pictures and information

Darning wool made from hemp fibers, ideal for filling smaller openings and hard-to-reach places. For heat and sound insulation.

Clay colour plaster for interior use,
Results in 6 m² surface at 2 mm thickness

Clay colour plaster for interior use. YOSIMA clay design plaster is coloured wall design with clay and loam.

HP 9 bio-lime plaster, as a base plaster for inside (also damp rooms) and outside, coarse grain (4 mm), for thick layers and stable plaster or as masonry mortar. Content sufficient for approx. 0,9 m² with an application thickness of 20 mm.

HP 9 Organic lime plaster, for thin-layer leveling for inside and outside,
Content is sufficient for approx. 1,3 m² with an application thickness of 15 mm.
Grain 1 mm

Lighter lime undercoat plaster for inside and outside. With an application thickness of 20 mm, content is sufficient for approx. 1.2 m². Also as masonry mortar for Hempcrete blocks

Undercoat plaster for inside and outside, very good workmanship thanks to the hemp surcharge. With a 20 mm application thickness content is sufficient for approx. 1 m²

Lime base plaster, easy to work with by added hemp and clay. Content is sufficient for 0,8 m² with a 20 mm thickness

Purely mineral natural lime mortar, especially for cellars.
Content is sufficient for 1,3 m² with a 20 mm thickness

Lime insulating plaster for indoor use - free of cement and pozzolan. Content is sufficient for 3,2 m² with a 1 cm thickness. Consumption: approx. 4kg/ m²/ cm application

Lime insulation plaster for outdoor use - free of cement and pozzolan.
Content is sufficient for 3,2 m² with a 1 cm thickness
Consumption: approx. 4kg/ m²/ cm application