Die Lehmbauhefte sind ein wahrer Augenschmaus, man bemerkt das die Autoren mit dem Herzen beim Lehm sind.

Heft 3 von Schauer+Volhard

Folding rule from Stabila, length 2 m, with clay shop design and matching slogan

Collection from the factory, opening hours can be found on Hessler's website

Thermal and sound insulation indoors and outdoors
1 pallet = 18 bricks/ 3.24 m² range
Brick format 30 x 60 x 30 cm (tongue and groove)

Special brushes for oil colours

Shipping is usually by DPD parcel, large products can also come as a forwarding shipment

Expanded clay lightweight aggregate according to DIN EN 13055-1
Mix with NHL 5 to produce insulating screed or subfloor structures. For a load-bearing and insulating subfloor, mix 350 kg of NHL 5 per 1 m³.

To underlay the profile moulding in the edge area
5 mm x 50 mm

997 mm x 120 mm x 0,4 mm

997 mm x 120 mm x 0,4 mm
3 slats per installation panel

Very white lime for the production of fine plasters.

For laying under tiles, parquet, cork and linoleum
Wood fibre 0.5 m²
30 x 500 x 1,000 mm, all-round tongue and groove

For laying under tiles and parquet
Wood fibre 0.5 m²
30 x 500 x 1,000 mm, with milled pipe deflections

Connector for air conditioning elements on suspended ceilings

Reinforcement strips for drywall panels
Roll 25 running meters, 10 cm wide

Thermal and sound insulation indoors and outdoors
1 pallet = 54 bricks/ 9.72 m² range
Stone format 12 x 60 x 30cm

Hemp shives with seal of quality from France, fine

Impact sound improvement of up to 30 dB depending on the floor structure
6 mm thick
86 x 59 cm = 0.5 m² per panel
Weight per panel 0.8 kg
Surface weight 1.6 kg/m²
Simply cut to size with a cutter, as an intermediate layer under e.g. parquet, on concrete, screed, wooden floors, installation planks or screed elements

Moisture-regulating, open to vapour diffusion, additional thermal insulation, quick installation.

User-friendly, natural-based coating and strengthening agent for absorbent, porous mineral substrates such as cement and anhydrite screed, concrete, unglazed ceramic and cotto tiles. Consumption: approx. 0.08 – 0.11 l per m² and application

Anwendungsfreundliches Beschichtungs- und Festigungsmittel auf natürlicher Basis für saugfähige, poröse mineralische Untergründe wie Zement- und Anhydritestrich, Beton, unglasierte Keramik- und Cotto-Fliesen. Verbrauch: ca. 0,08 – 0,11 l pro m² und Auftrag

User-friendly, natural-based coating and strengthening agent for absorbent, porous mineral substrates such as cement and anhydrite screed, concrete, unglazed ceramic and cotto tiles. Consumption: approx. 0.08 – 0.11 l per m² and application