GUTEX Thermowall-gf is a particularly pressure-resistant, stable plasterable insulation board in 40 or 60 mm thickness – ideal for direct planking on wooden studs in ecological Thermowall ETICS.
The 40 mm tongue and groove version is ideal for constructing interior walls. Plaster can be applied directly.
Bulk density p: ~185 kg/m³
Nominal thermal conductivity 0.043 W/mK
Compressive stress/strength 150 kPa
Tensile strength perpendicular to the board plane 20 kPa

Wood fibre insulation board for external insulation (ETICS) on solid wood or mineral substrates and in timber frame construction - without rear ventilation.
Bulk density p: ~160 kg/m³
Nominal value thermal conductivity at 80 - 160 mm 0.040 W/mK
Compressive stress/strength 100 kPa
Tensile strength perpendicular to the board plane 10 kPa

Impact sound insulation board for use in combination with spruce installation strips, as a substructure for screwed floorboards or parquet flooring. Board 1190x380x40 (cover dimension: 1170x360)

GUTEX Thermofloor is the impact sound insulation board for all floor structures with a live load of up to 5 kN/m². Board 1200x600, butt joint

For planking stud structures and full-surface interior substrates. Reinforced on both sides.
Panel dimensions: 125 x 100 cm

0.77 m² per panel
Board size 135 x 57.5 cm
best wood fibre insulation mat for insulating roofs, partition walls, ceiling insulation or exterior walls
Nominal value thermal conductivity λD 0.036 W/mK
Bulk density ρ ~ 50 kg/m³
Easy to cut, low-dust, strong clamping force

Domestic oak sanded raw in 15 and 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Sapwood-free surface, no wormholes allowed; knot diameter up to 1/6 of the plank width allowed – measured on the narrow side; tight knots allowed; width of dry cracks in knots up to about 10% of the knot diameter allowed.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

Domestic oak sanded raw in 15 and 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Fair mix of natural and rustic grading; knots and holes that can be seen through from straight above are not permitted;
knot holes and larger cracks are standardly filled with brown-colored filler.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

Domestic oak, rustic “as grown” grading, sanded raw.
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Strongly rustic grading “as grown” (=wild oak), i.e. larger drying cracks and knot holes are permitted and not filled. Wormholes, bark inclusions, and open knots may occur. Long and wide cracks, as well as a higher sapwood proportion, are possible. The product cannot be factory-filled.

Domestic oak sanded raw in 15 and 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Sorting distinctive with heavy worm marks, i.e. drying cracks and knot holes, as well as open knots and wormholes are permitted and are standardly filled black. Only available as a strongly contrasted, heavily flamed surface.
Bark ingrowth and a higher sapwood content may occur.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

heimiscDomestic oak sanded raw in 15 and 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Sapwood-free surface, no wormholes allowed; knot diameter up to 1/6 of the plank width allowed – measured on the narrow side; tight knots allowed; width of dry cracks in knots up to about 10% of the knot diameter allowed.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.hes Laubholz geschliffen roh in 15 und 19 mm Dicke

Domestic oak sanded raw in 15 and 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Fair mix of natural and rustic grading; knots and holes that can be seen through from straight above are not permitted;
knot holes and larger cracks are standardly filled with brown-colored filler.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

Domestic hardwood sanded raw in 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Sapwood-free surface, no wormholes allowed; knot diameter up to 1/6 of the plank width allowed – measured on the narrow side; tight knots allowed; width of dry cracks in knots up to about 10% of the knot diameter allowed;
mixing ratio approx. 1/3 brown heartwood – 2/3 white portion.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

Domestic hardwood sanded raw in 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Fair mix of natural and rustic grading; knots and holes that can be seen through from straight above are not permitted;
knot holes and larger cracks are standardly filled with brown-colored filler.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

Domestic hardwood sanded raw in 19 mm thickness, cover width 165 mm
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Sapwood-free surface, no wormholes allowed; knot diameter up to 1/6 of the plank width allowed – measured on the narrow side; tight knots allowed; width of dry cracks in knots up to about 10% of the knot diameter allowed;
black veins and tight black knots up to 1/6 of the plank width are allowed – measured on the narrow side; knot holes and larger dry cracks are standardly filled with light-colored filler.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

Domestic hardwood sanded raw in 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Fair mix of natural and rustic grading; knots and holes that can be seen through from straight above are not permitted;
knot holes and larger cracks are standardly filled with brown-colored filler.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

Domestic softwood sanded raw in 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Sound sapwood up to about 1/5 of the board width allowed; knot diameter for tight knots up to about 1/5 of the plank width allowed – measured on the narrow side; width of dry cracks in knots up to 8% of the knot diameter allowed; width of surface cracks up to 2% of the board width allowed; open resin pockets, knot holes, and larger drying cracks are standardly filled (standard filler color is brown). Loose knots are drilled out and replaced with a knot plug; slanting cracks (peeling) are not permitted; ring separations are not permitted.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

Domestic softwood sanded raw in 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Sound sapwood up to about 1/5 of the board width allowed; knot diameter for tight knots up to about 1/5 of the plank width allowed – measured on the narrow side; width of dry cracks in knots up to 8% of the knot diameter allowed; width of surface cracks up to 2% of the board width allowed; open resin pockets, knot holes, and larger drying cracks are standardly filled (standard filler color is brown). Loose knots are drilled out and replaced with a knot plug; slanting cracks (peeling) are not permitted; ring separations are not permitted.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

Domestic softwood sanded raw in 19 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Sound sapwood up to about 1/5 of the board width allowed; knot diameter for tight knots up to about 1/5 of the plank width allowed – measured on the narrow side; width of dry cracks in knots up to 8% of the knot diameter allowed; width of surface cracks up to 2% of the board width allowed; open resin pockets, knot holes, and larger drying cracks are standardly filled (standard filler color is brown). Loose knots are drilled out and replaced with a knot plug; slanting cracks (peeling) are not permitted; ring separations are not permitted.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.

heimisches Nadelholz geschliffen roh in 19 mm Dicke

Domestic softwood sanded raw in 27 mm thickness
System lengths for endless installation 0.60–2.30 m
Wood moisture 9 % (+/- 2 %)
Longitudinal and end edges chamfered
All-round tongue and groove connection 6 mm
Cover dimension = calculation dimension

Black pin knots up to 5 mm and sound tight knots up to 10% of the plank width + 40 mm are allowed. Dead and loose knots, knot holes, and decayed knots are replaced with a knot plug up to max. 40 mm of the same wood species. Tight wing knots up to 10% of the width + 30 mm are allowed. Resin pockets up to 2 mm × 25 mm, as well as up to three resin pockets up to 5 mm wide and totaling 700 mm in length, may occur. Cracks of 1.5 mm width and up to 150 mm length are allowed; larger cracks up to 3 mm width and across the plank width are filled. End cracks are allowed up to ½ of the plank width. Ring shakes, fungus, and insect damage are not allowed. Pith up to 1/3 of the board length and max. 7 mm width is allowed. Natural color variation except blue stain may occur, as well as occasional light bark inclusion. Wane is only allowed on the backside if tongue and groove are intact over ¾ of the board length.

Boards packed sealed in shrink film on pallet or loose in transport boxes wrapped in foil.