für Prebena Druckluftnagler

passendes Zubehör für Putzwerfer Enduivit 3

Thin rainproof underlay board with unique tongue and groove profiling, board dimensions: 2500 x 750 x 22 mm
Thermal conductivity nominal value 0.045 W/mK
Windproof tongue-and-groove joint protects the insulation construction from cold air flowing through

Stone replacement mortar, preserves and imitates stone.
For sandstone and hard stone, fine structure
Material can be tinted by adding pigments to match the colour of your stone. Optional surface protection with Beeck stone glaze, colourless, or slightly glazed to perfectly match the old patina.
Can be applied for up to 48 hours
from 1 to 10 cm layer thickness

Thin rainproof underlay board with unique tongue and groove profiling, board dimensions: 2500 x 750 x 35 mm
Thermal conductivity nominal value 0.045 W/mK
Windproof tongue-and-groove joint protects the insulation construction from cold air flowing through

Reinforced high-performance vapour control layer for all fibrous insulation materials

Reinforced high-performance vapour control layer for all fibrous insulation materials

Heat and sound insulation indoors and outdoors
1 pallet = 84 bricks/ 15.12 m² coverage
Stone format 7.5 x 60 x 30 cm

Thermal and sound insulation indoors and outdoors
1 pallet = 72 bricks/ 12.96 m² coverage
Stone size 9 x 60 x 30 cm

Wood fibre insulation board for external insulation (ETICS) on solid wood or mineral substrates and in timber frame construction - without rear ventilation.
Bulk density p: ~160 kg/m³
Nominal value thermal conductivity at 80 - 160 mm 0.040 W/mK
Compressive stress/strength 100 kPa
Tensile strength perpendicular to the board plane 10 kPa
Edge formation tongue and groove
1,3 / 0,60 m

0.77 m² per panel
Board size 135 x 57.5 cm
best wood fibre insulation mat for insulating roofs, partition walls, ceiling insulation or exterior walls
Nominal value thermal conductivity λD 0.036 W/mK
Bulk density ρ ~ 50 kg/m³
Easy to cut, low-dust, strong clamping force

Wood fibre insulation board for external insulation (ETICS) on solid wood or mineral substrates and in timber frame construction - without rear ventilation.
Bulk density p: ~160 kg/m³
Nominal value thermal conductivity at 80 - 160 mm 0.040 W/mK
Compressive stress/strength 100 kPa
Tensile strength perpendicular to the board plane 10 kPa
Edge formation tongue and groove
1,3 / 0,60 m

Vapor barrier paper for interior work

Surface treatment and sealing for smoothing clay, rammed earth and wood. Rammed earth 1:2 / 5-7 m² per 0.5 l. Smoothing clay 1:6 / 25-35 m² per 0.5 l

Second coat plaster made of clay and straw, robust, classic material for large dimensions. Content yields for approx. 1,7 m² at D= 1.5 cm

Expanded clay lightweight aggregate according to DIN EN 13055-1
Mix with NHL 5 to produce insulating screed or subfloor structures. For a load-bearing and insulating subfloor, mix 350 kg of NHL 5 per 1 m³.

1 m³ hemp lime fill, loose as filling for a facing wall, ceiling filling or floor insulation between the bearing timbers

45 litres of hemp lime fill, loose as a filling for a facing wall, ceiling filling or floor insulation between the bearing timbers

Organic architecture is a type of construction that emerged around 1900 in search of a completely new style for the new era.

Compressive strength class 5, application class II
is used for load-bearing, clad or otherwise structurally weather-protected exterior masonry and interior masonry in accordance with DIN 18940
Consumption:
33 bricks / m² for 17.5 cm masonry thickness
44 bricks / m² for 24.5 cm masonry thickness
66 bricks / m² for 36.0 cm masonry thickness

Real clay colour samples to feel - find your favourite shade with hand-painted original samples. Natural. Healthy. Simply decide.